Top 10 Solenoid Valve For Honeywell Whole House Humidifier He365a

Proper humidification of your home is important for protecting your family’s health and the beauty of your home. The 4040 24 Volt Solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.

ASCO’s 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted. With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures from 0 psi to its rated maximum. Internally piloted constructions use line pressure to assist operation. When the coil is de-energized (on a Normally Closed Valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve.

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, one inch (1″) female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20="" cst),="" oils="" and="" hydrocarbons,="" gasoline,="" kerosene,="" or="" diesel="" fuel.="">

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00002

Size: 1″

Flow Aperture: 25 mm

Body Material: Brass

Gasket / Diaphragm / Seal: VITON

Rated voltage: AC 110 V, ± 10%

Current: 0.191 A

Power rating: 21 VA

Operation Type: Semi-direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 12 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 12 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

CA PROP65 WARNING – This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. They are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Product Description

Breathe easy and get the most out of your home humidifier with a Honeywell Home Whole House Humidifier Pad. These effective pads distribute moisture more evenly and thoroughly throughout your home. Anti-microbial coating works to reduce airborne bacteria and prevent mold, fungus, and algae and bacteria from spreading.

From the Manufacturer

Reliable Honeywell Whole-House Humidifiers work with your homes furnace to maintain a proper, comfortable humidity level throughout the home. A Honeywell humidifier pad is specially designed to spread moisture evenly and should be changed twice per heating season to maximize comfort.