Top 10 Ge Circuit Breaker 2 Pole 30 Amp Thql

Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self test & lockout feature enables the dual function circuit breaker to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground/arc fault. This effortless system guarantees that only the best protection is given to your home at all times.

GE THQL2120GFT Plug-In Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 20 Amp 120/240 Volt AC

Product Description

GE, 100a, double pole circuit breaker, 240V, bulk. The product is good to use. Manufactured in china.

From the Manufacturer

This 120/240-Volt GE 100 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding sub-feed panel boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

GE, 30a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.

From the Manufacturer

This 120/240 volt GE 30 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Connecticut Electric manufactures new high quality replacement circuit breakers for Challenger load centers that accept Challenger Type A style circuit breakers. Circuit breakers should only be replaced with new testd and Safety Agency Listed circuit breakers, never used or refurbished ones.

Product Description

GE, 40a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.

From the Manufacturer

This 120/240 volt GE 40 amp, double pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

GE circuit breaker, type thql, q-line, standard, 120/240 vac, 80 a, 1 phase, the frame, fixed trip, 800 a trip, 10 ka interrupt, 2 poles, 6 – 1/0 AWG/4 – 1/0 AWG wire, lug terminal, plug in mounting, 60 – 75 deg c, 3.28 in overall length, 2 in overall width, 2.38 in overall depth, thermoset, ansi specified, CSA certified, UL listed, 2 in spacing. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. may be used, when marked to accept, with American switch, arrow Hart, Bryant, general switch, gte, sylvania, most item, Murray, Westinghouse type br, Challenger, Crouse-Hinds. 15 to 30 amp 14 – 8 cu or 12 – 8 AL AWG wire, 35 to 60 amp 8 – 3 cu or 8 – 2 AL AWG wire, 70 to 100 amp 6-1/0 cu or 4 – 1/0 AL AWG wire. Ul listed, Hacr rated. 120/240 volt; 10, 000 air. 1&Quot; per pole (2" TOTAL).

From the Manufacturer

This 120/240 volt GE 80 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Murray breakers are intended for use in Murray and Crouse Hinds type load centers. These breakers are plug in style and are on a 1/2-Inch per pole format. See the wiring diagram on the load center for breaker type acceptance. The 1/2-Inch breakers will only fit in designed spaces within certain load centers. The wiring diagram will state if the MH-T breakers are accepted and will detail where they can be installed. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

Siemens QF260A 60 Amp, 2 Pole, 120/240V Ground Fault Circuit Interrupter with Self Test and Lockout Feature.